Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img PCI2040PGE datasheet by Texas Instruments

    • PCI TO DSP BRIDGE CONTROLLER, COMPLIANT TO COMPACTPCI HOT SWAP SPECIFICATION 1.0
    • Original
    • Yes
    • Yes
    • Active
    • EAR99
    • 8542.39.00.01
    • Powered by Findchips Logo Findchips

    PCI2040PGE datasheet preview

    PCI2040PGE Frequently Asked Questions (FAQs)

    • The recommended operating temperature range for the PCI2040PGE is -40°C to 85°C.
    • The PCI2040PGE can be configured for 3.3V or 5V operation by connecting the VCC pin to the desired voltage supply. Additionally, the I/O voltage (VIO) pin should be connected to the same voltage supply as the VCC pin.
    • The maximum clock frequency supported by the PCI2040PGE is 66 MHz.
    • A reset circuit can be implemented using a resistor and capacitor connected to the RESET# pin. The recommended values are a 1 kΩ resistor and a 0.1 μF capacitor.
    • The PERST# pin is an active-low reset input that resets the PCI interface. It is typically connected to a power-on reset circuit or a manual reset switch.
    Supplyframe Tracking Pixel