Texas Instruments provides a recommended PCB layout guide in their application note SLLA883, which includes guidelines for signal routing, power supply decoupling, and thermal management.
The PCIe interface configuration is done through the PCI1410APGEG4's configuration registers. Refer to the device's programming guide (SLAU575) for details on how to configure the interface for x1, x2, or x4 lanes.
The maximum power consumption of the PCI1410APGEG4 is dependent on the operating frequency and usage scenario. According to the datasheet, the typical power consumption is around 2.5W, but it can go up to 4.5W in certain scenarios. It's recommended to consult the power management section of the datasheet for more information.
A reliable reset mechanism can be implemented using the PCI1410APGEG4's reset pin (RESET_N) and a external reset controller. The reset controller should be able to generate a clean reset signal that meets the device's reset timing requirements. Refer to the device's datasheet and application notes for more information.
The recommended operating conditions for the PCI1410APGEG4 include an ambient temperature range of 0°C to 70°C, a supply voltage of 1.8V ± 5%, and a clock frequency of up to 100 MHz. Refer to the device's datasheet for more information on operating conditions and limitations.
PCI1410APGEG4 datasheet
by Texas Instruments
