Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img PCA9536DP,118 datasheet by NXP Semiconductors

    • 4-bit I2C-bus and SMBus I/O port - # of Addresses: 1 ; I2C-bus: 400 kHz; Interrupt: No ; Max Sink Current per bit: 25 mA; Max Sink Current, per package: 50 mA; Number of bits: 4 ; Operating temperature: -40~85 Cel; Operating voltage: 2.3~5.5 VDC; Reset input pin: No ; Source Current per bit: 10 mA; Weak Pull-Up Current Source: Yes; Package: SOT505-1 (TSSOP8); Container: Reel Pack, SMD, 13"
    • Original
    • Yes
    • Unknown
    • Active
    • 8542.39.00.01
    • 8542.39.00.00
    • Powered by Findchips Logo Findchips

    PCA9536DP,118 datasheet preview

    PCA9536DP,118 Frequently Asked Questions (FAQs)

    • The PCA9536DP can support I2C bus frequencies up to 400 kHz.
    • To use an external pull-up resistor, connect the resistor between the SCL/SDA pins and the VCC pin. The recommended value is 1 kΩ to 10 kΩ.
    • The PCA9536DP can sink or source up to 25 mA per output pin.
    • The PCA9536DP can be reset by pulling the RESET pin low for at least 1 ms. This will reset the device to its default state.
    • Yes, the PCA9536DP is compatible with 5V power supplies. However, the input voltage on the I2C bus should not exceed 3.6V.
    Supplyframe Tracking Pixel