PCA9535DBR datasheet by Texas Instruments

PCA9535DBR Frequently Asked Questions (FAQs)

• What is the maximum frequency of the I2C bus that the PCA9535DBR can support?
  The PCA9535DBR can support I2C bus frequencies up to 400 kHz.
• How do I configure the PCA9535DBR to operate in input mode?
  To configure the PCA9535DBR to operate in input mode, set the corresponding bit in the configuration register (register 0x06) to '1'. This will configure the pin as an input.
• What is the maximum current that the PCA9535DBR can sink or source per pin?
  The PCA9535DBR can sink or source up to 25 mA per pin.
• How do I reset the PCA9535DBR?
  The PCA9535DBR can be reset by pulling the RESET pin low for at least 1 ms. This will reset the device to its default state.
• What is the purpose of the internal pull-up resistors on the PCA9535DBR?
  The internal pull-up resistors on the PCA9535DBR are used to pull up the I2C bus lines (SDA and SCL) to the supply voltage (VCC) when the device is not actively driving the bus.