Datasheet Archive: PCA8550DB,118 datasheet by NXP Semiconductors

PCA8550DB,118 datasheet by NXP Semiconductors

Description 4-bit multiplexed/1-bit latched 5-bit I<sup>2</sup>C EEPROM DIP switch - # of Addresses: 1 ; # of Outputs/Latched Outputs/Internal EEPROM Registers: 411 ; I2C-bus: 400 kHz; Operating temperature: 0~70 Cel; Operating voltage: 3.0~3.6 VDC; Package: SOT338-1 (SSOP16); Container: Reel Pack, SMD, 13"
Datasheet Type Original
RoHS Yes
Pb Free Unknown
Lifecycle Obsolete
HTS Code 8542.32.00
Schedule B 8542.39.00.00
Price & Stock Find it at Findchips.com

Equivalent Parts !
Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.

PCA8550DB 935261458118 PCA8550DBR PCA8550DBLE

PCA8550DB,118 datasheet preview

Download Datasheet

The recommended operating voltage range for PCA8550DB,118 is 2.3V to 5.5V, with a typical voltage of 3.3V.
To configure the PCA8550DB,118 for I2C-bus mode, connect the SCL pin to a clock signal, and the SDA pin to a bidirectional data line. Ensure the pull-up resistors are connected to the supply voltage (VCC) and the bus capacitance is within the recommended range.
The PCA8550DB,118 supports clock frequencies up to 400 kHz in standard mode and up to 1 MHz in fast mode.
The PCA8550DB,118 can be reset by applying a low signal to the RST pin for a minimum of 1 ms. This resets the device to its default state.
The A0, A1, and A2 address pins are used to set the slave address of the PCA8550DB,118 in I2C-bus mode. These pins allow multiple devices to share the same bus.