PAM8304AYR datasheet by Diodes Incorporated

PAM8304AYR Frequently Asked Questions (FAQs)

• What is the recommended PCB layout for optimal performance?
  A good PCB layout for the PAM8304AYR involves keeping the audio signal traces short and away from the power supply lines, using a solid ground plane, and placing the input and output capacitors close to the IC. A 4-layer PCB with a dedicated ground plane is recommended.
• How do I ensure the amplifier is stable and doesn't oscillate?
  To ensure stability, make sure to follow the recommended component values and PCB layout guidelines. Also, add a 10nF capacitor between the BYPASS pin and ground to prevent oscillation. Additionally, use a low-ESR capacitor for the power supply decoupling.
• What is the maximum power dissipation of the PAM8304AYR?
  The maximum power dissipation of the PAM8304AYR is dependent on the ambient temperature and the thermal resistance of the PCB. As a general guideline, the maximum power dissipation is around 2.5W at 25°C ambient temperature. However, this can be increased with proper heat sinking and thermal management.
• Can I use the PAM8304AYR in a bridged configuration?
  Yes, the PAM8304AYR can be used in a bridged configuration to increase the output power. However, this requires careful consideration of the output stage and power supply design to ensure stability and prevent overheating.
• What is the recommended input and output coupling capacitor value?
  The recommended input coupling capacitor value is 1uF to 10uF, and the recommended output coupling capacitor value is 10uF to 22uF. The exact value depends on the specific application and frequency response requirements.