P89LPC936FDH datasheet by NXP Semiconductors

P89LPC936FDH Frequently Asked Questions (FAQs)

• What is the maximum clock frequency that can be used with the P89LPC936FDH?
  The maximum clock frequency for the P89LPC936FDH is 12 MHz, but it can be overclocked up to 18 MHz with some limitations.
• How do I configure the oscillator for the P89LPC936FDH?
  The oscillator can be configured using the OSCCFG register. The oscillator frequency can be set to either 12 MHz or 18 MHz, and the oscillator mode can be set to either internal or external.
• What is the purpose of the watchdog timer in the P89LPC936FDH?
  The watchdog timer is used to reset the microcontroller if it becomes stuck in an infinite loop or if it fails to respond within a certain time period. This is useful for ensuring system reliability and preventing system crashes.
• How do I use the UART in the P89LPC936FDH?
  The UART in the P89LPC936FDH can be used for serial communication. It can be configured using the UART registers, and the baud rate can be set using the UART_BAUD register.
• What is the maximum current that can be sourced or sunk by the GPIO pins of the P89LPC936FDH?
  The maximum current that can be sourced or sunk by the GPIO pins of the P89LPC936FDH is 20 mA.