Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img P82B715DRG4 datasheet by Texas Instruments

    • I2C Bus Extender 8-SOIC -40 to 85
    • Original
    • Yes
    • Yes
    • Active
    • 8542.31.00.01
    • 8542.31.00.00
    • Powered by Findchips Logo Findchips
    • Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.

    P82B715DRG4 datasheet preview

    P82B715DRG4 Frequently Asked Questions (FAQs)

    • A good PCB layout for the P82B715DRG4 involves keeping the input and output traces short and wide, using a solid ground plane, and placing the input and output capacitors close to the device. Additionally, it's recommended to use a common mode choke or a ferrite bead to filter out high-frequency noise.
    • To ensure proper biasing, connect the EN pin to a voltage source that is within the recommended operating range (2.7V to 5.5V). Also, make sure the input voltage (VIN) is within the recommended range (2.7V to 5.5V) and the output voltage (VOUT) is set to the desired level using the FB pin.
    • The maximum output current capability of the P82B715DRG4 is 1.5A. However, it's recommended to derate the output current based on the ambient temperature and the desired output voltage to ensure reliable operation.
    • To handle thermal considerations, ensure good airflow around the device, use a heat sink if necessary, and avoid operating the device at high ambient temperatures (above 85°C). Also, monitor the device's junction temperature (TJ) to prevent overheating.
    • To minimize EMI, use a shielded inductor, keep the input and output traces short and away from sensitive circuits, and use a common mode choke or ferrite bead to filter out high-frequency noise. Additionally, ensure the device is placed away from other noise-sensitive components.
    Supplyframe Tracking Pixel