Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img OPA314AIDCKR datasheet by Texas Instruments

    • Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps, Integrated Circuits (ICs), IC OPAMP GP 3MHZ RRO SC70-5
    • Original
    • Yes
    • Yes
    • Active
    • EAR99
    • 8542.33.00.01
    • 8542.33.00.00
    • Powered by Findchips Logo Findchips
    • Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.

    OPA314AIDCKR datasheet preview

    OPA314AIDCKR Frequently Asked Questions (FAQs)

    • A good PCB layout for OPA314AIDCKR involves keeping the input and output traces short and away from each other, using a solid ground plane, and placing decoupling capacitors close to the device. A 4-layer PCB with a dedicated analog ground plane is recommended.
    • To ensure stability, ensure that the gain is set to a value that does not exceed the recommended maximum gain, and that the feedback resistors are chosen to minimize phase shift. Additionally, adding a capacitor in parallel with the feedback resistor can help improve stability.
    • The maximum power dissipation of OPA314AIDCKR is 670mW. However, this value can be affected by the ambient temperature, and the device should be derated accordingly to prevent overheating.
    • While OPA314AIDCKR is rated for operation up to 125°C, its performance may degrade at high temperatures. It's recommended to derate the device's specifications and ensure proper heat sinking to prevent overheating.
    • To protect OPA314AIDCKR from EMI, use a shielded enclosure, keep the device away from high-frequency sources, and use filtering components such as ferrite beads or common-mode chokes to reduce noise.
    Supplyframe Tracking Pixel