Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img OP07AJ datasheet by Maxim Integrated Products

    • Precision Op Amp
    • Original
    • No
    • Unknown
    • Obsolete
    • EAR99
    • 8542.33.00.01
    • 8542.33.00.00
    • Powered by Findchips Logo Findchips
    • Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.

    OP07AJ datasheet preview

    OP07AJ Frequently Asked Questions (FAQs)

    • The maximum power supply voltage for the OP07AJ is ±18V, or 36V total.
    • The OP07AJ has a bandwidth of 0.4MHz, making it more suitable for low-frequency or audio applications. For high-frequency applications, a different op-amp with a higher bandwidth may be more suitable.
    • Yes, the OP07AJ can be used in single-supply applications, but the input common-mode voltage range is limited to within 2V of the positive supply rail. A voltage divider or other level-shifting circuit may be required to accommodate a single supply voltage.
    • To ensure stability, ensure that the feedback loop has a gain of less than 1 at the frequency where the phase shift is 180°. Additionally, use a capacitor in the feedback loop to compensate for phase shift and ensure stability.
    • The typical input bias current of the OP07AJ is 20pA, making it suitable for applications where high input impedance is required.
    Supplyframe Tracking Pixel