NX5P1000UKZ datasheet by NXP Semiconductors

NX5P1000UKZ Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the NX5P1000UKZ?
  The recommended operating voltage range for the NX5P1000UKZ is 1.65V to 3.6V.
• How do I configure the NX5P1000UKZ for low-power mode?
  To configure the NX5P1000UKZ for low-power mode, set the PWRDWN pin high and ensure that the device is in the idle state. Additionally, reduce the clock frequency and disable unnecessary peripherals to minimize power consumption.
• What is the maximum clock frequency supported by the NX5P1000UKZ?
  The maximum clock frequency supported by the NX5P1000UKZ is 100 MHz.
• How do I implement a watchdog timer on the NX5P1000UKZ?
  To implement a watchdog timer on the NX5P1000UKZ, use the built-in watchdog timer (WDT) peripheral. Configure the WDT to reset the device if it does not receive a reset signal within a specified time period.
• Can I use the NX5P1000UKZ with an external crystal oscillator?
  Yes, the NX5P1000UKZ can be used with an external crystal oscillator. Connect the crystal oscillator to the XTAL1 and XTAL2 pins, and configure the device to use the external oscillator as the clock source.