Mini-Circuits recommends a 4-layer PCB with a solid ground plane, and a low-inductance path to ground for the device's ground pins. A good layout practice is to use a star-grounding scheme, where all ground connections are connected to a single point on the PCB.
The NCS2-622+ requires a bias voltage of 5V ± 0.5V and a bias current of 100mA ± 10mA. Ensure that the bias voltage is well-regulated and decoupled to prevent noise and ripple from affecting the device's performance.
The NCS2-622+ is rated for operation from -40°C to +85°C. However, it's recommended to operate the device within a temperature range of 0°C to 70°C for optimal performance and reliability.
The NCS2-622+ is an ESD-sensitive device. Handle the device with ESD-protective equipment, such as wrist straps and mats, and ensure that the PCB is designed with ESD protection in mind, such as using ESD-protection diodes and resistors.
The NCS2-622+ is designed for 50Ω input and output impedance matching. Ensure that the input and output traces on the PCB are designed to match this impedance to prevent signal reflections and ensure optimal performance.
NCS2-622+ datasheet
by Mini-Circuits
