The recommended PCB layout for the MXL1013DS8+ is to use a 4-layer board with a solid ground plane, and to keep the analog and digital signals separate to minimize noise and interference. Additionally, it's recommended to use a low-ESR capacitor for the VCC bypass and to place it as close as possible to the VCC pin.
To ensure the MXL1013DS8+ is properly powered, make sure to provide a clean and stable power supply voltage within the recommended range of 2.7V to 5.5V. Also, ensure that the power supply can provide enough current to support the device's operating current, which is typically around 1mA.
The maximum data transfer rate of the MXL1013DS8+ is 100kbps in the standard mode and 400kbps in the fast mode.
During power-up, it's recommended to apply the power supply voltage to the VCC pin before applying any input signals to the device. During power-down, it's recommended to remove the input signals before removing the power supply voltage from the VCC pin.
The recommended operating temperature range for the MXL1013DS8+ is -40°C to +85°C. However, it's recommended to operate the device within a temperature range of 0°C to 70°C for optimal performance and reliability.
MXL1013DS8+ datasheet
by Maxim Integrated Products
