The recommended PCB layout for the MXL1013CN8+ involves placing the device close to the power source, using a solid ground plane, and minimizing the length of the input and output traces. Additionally, it's recommended to use a 10uF capacitor between the VIN and GND pins to filter out noise.
To ensure stability, make sure to follow the recommended PCB layout, use a sufficient output capacitor (at least 10uF), and keep the input voltage within the specified range. Additionally, adding a small capacitor (around 10nF) between the VIN and BYP pins can help to reduce noise and prevent oscillation.
The MXL1013CN8+ can handle input voltages up to 18V, but it's recommended to keep the input voltage within the specified range of 7V to 15V for optimal performance and reliability.
The MXL1013CN8+ is rated for operation up to 125°C, but it's recommended to derate the output current and input voltage as the temperature increases to ensure reliability and prevent overheating.
The output voltage of the MXL1013CN8+ can be calculated using the formula: VOUT = (VIN x (1 + R1/R2)) - (IOUT x RDS(ON)), where R1 and R2 are the resistors used to set the output voltage, IOUT is the output current, and RDS(ON) is the on-resistance of the internal switch.
MXL1013CN8+ datasheet
by Maxim Integrated Products
