MSP430G2313IRHB32R datasheet by Texas Instruments

MSP430G2313IRHB32R Frequently Asked Questions (FAQs)

• What is the maximum clock frequency that can be used with the internal oscillator?
  The maximum clock frequency that can be used with the internal oscillator is 16 MHz. However, it's recommended to use a clock frequency of up to 12 MHz for optimal performance and to ensure that the device operates within its specified parameters.
• How do I configure the MSP430G2313IRHB32R for low-power operation?
  To configure the MSP430G2313IRHB32R for low-power operation, you can use the Power Management Module (PMM) to control the power modes. You can also use the Low Power Mode 3 (LPM3) or Low Power Mode 4 (LPM4) to reduce power consumption. Additionally, you can disable unused peripherals and use the clock system to reduce power consumption.
• What is the maximum current that can be sourced or sunk by the GPIO pins?
  The maximum current that can be sourced or sunk by the GPIO pins is 4 mA. However, it's recommended to limit the current to 2 mA or less to ensure that the device operates within its specified parameters.
• How do I implement a watchdog timer on the MSP430G2313IRHB32R?
  The MSP430G2313IRHB32R has a built-in watchdog timer that can be enabled and configured using the Watchdog Timer Control Register (WDTCTL). You can set the watchdog timer interval and enable it to reset the device if it fails to respond within the specified time period.
• What is the maximum voltage that can be applied to the analog-to-digital converter (ADC) input pins?
  The maximum voltage that can be applied to the ADC input pins is VCC + 0.3V. It's recommended to ensure that the input voltage is within the specified range to ensure accurate ADC conversions.