The maximum operating temperature range for the MSP430F2330TRHAT is -40°C to 85°C, as specified in the datasheet. However, it's recommended to operate the device within the recommended operating temperature range of -40°C to 70°C for optimal performance and reliability.
To configure the MSP430F2330TRHAT for low-power operation, you can use the Power Management Module (PMM) to control the power modes. You can also use the Low Power Mode (LPM) to reduce power consumption. Additionally, you can disable unused peripherals and use the clock system to reduce power consumption. Refer to the datasheet and the MSP430F2330TRHAT user's guide for more information.
The maximum clock frequency for the MSP430F2330TRHAT is 16 MHz, which is the maximum frequency of the internal digitally controlled oscillator (DCO). However, the device can also be clocked using an external clock source, and the maximum frequency depends on the specific clock source used.
The MSP430F2330TRHAT can be programmed using the Texas Instruments Code Composer Studio (CCS) integrated development environment (IDE) or the IAR Embedded Workbench. You can also use the MSP430F2330TRHAT's built-in bootloader to program the device using a serial interface. Refer to the datasheet and the user's guide for more information on programming the device.
The MSP430F2330TRHAT has 8 KB of flash memory available for program storage. However, some of this memory is used by the bootloader and other system functions, so the actual amount of available flash memory for user programs is around 6 KB.
MSP430F2330TRHAT datasheet
by Texas Instruments
