The maximum operating temperature range for the MSP430F2330IRHAT is -40°C to 85°C, as specified in the datasheet. However, it's essential to note that the device can operate at a reduced frequency and voltage at higher temperatures.
To configure the MSP430F2330IRHAT for low-power operation, you can use the Power Management Module (PMM) to control the voltage regulator, switch between active and low-power modes, and adjust the clock frequency. Additionally, you can use the Low Power Mode (LPM) to reduce power consumption.
The maximum clock frequency for the MSP430F2330IRHAT is 16 MHz, which can be achieved using an external crystal oscillator or an internal digitally controlled oscillator (DCO). However, the actual clock frequency may vary depending on the specific application and operating conditions.
The MSP430F2330IRHAT can be programmed using the Texas Instruments Code Composer Studio (CCS) integrated development environment (IDE) or the IAR Embedded Workbench. You can also use the MSP430 Flasher or the MSP430 FET debugger to program the device.
The MSP430F2330IRHAT has 8 KB of flash memory, which can be used to store program code and data. Additionally, the device has 1 KB of RAM for data storage.
MSP430F2330IRHAT datasheet
by Texas Instruments
Findchips
Findchips