A 4-layer PCB with a solid ground plane and a separate power plane is recommended. The device should be placed near the center of the board, and the RF traces should be kept short and away from digital signals.
The device requires a single 3.3V power supply, and the voltage regulator should be placed close to the device. A 10uF capacitor should be used to decouple the power supply, and a 1uF capacitor should be used to decouple the VCC pin.
The recommended operating temperature range for the MSA-1105-STRG is -40°C to 85°C. However, the device can operate up to 105°C with reduced performance and reliability.
Use a spectrum analyzer to check the RF output, and an oscilloscope to check the clock and data signals. Check the power supply voltage and decoupling capacitors, and ensure the device is properly biased. Consult the datasheet and application notes for specific troubleshooting guidelines.
Yes, but the device is optimized for 50Ω systems. For non-50Ω systems, external matching networks may be required to achieve optimal performance. Consult the datasheet and application notes for specific guidance.
