A 4-layer PCB with a solid ground plane and a separate power plane is recommended. The device should be placed near the center of the board, and the RF traces should be kept short and away from digital signals.
The device requires a single 5V power supply, and the recommended biasing is Vcc = 5V, Vdd = 3.3V, and Vee = 0V. Ensure that the power supply is clean and well-regulated to prevent noise and oscillations.
The device can handle up to 1W of RF power, but it's recommended to operate at a maximum of 0.5W to ensure reliable operation and prevent overheating.
The device has a nominal impedance of 50 ohms, but it may require additional matching components to achieve optimal performance. Use a network analyzer or simulation software to determine the optimal matching circuit for your specific application.
The device is specified to operate from -40°C to +85°C, but it's recommended to operate within a narrower range (e.g., 0°C to 70°C) for optimal performance and reliability.
