A 4-layer PCB with a solid ground plane and a separate power plane is recommended. The device should be placed near the center of the board, and the RF traces should be kept short and away from digital signals.
The device requires a single 5V supply voltage, and the recommended biasing is Vdd = 5V, Vgg = 2.5V, and Vss = 0V. Ensure that the voltage supply is clean and well-regulated.
The device can handle up to 2W of RF power, but it's recommended to derate the power handling to 1W or less for reliable operation.
The device has a nominal impedance of 50 ohms. Use a pi-network or a T-network to match the impedance to your system. The datasheet provides a recommended matching circuit.
The device operates from -40°C to +85°C, but the optimal performance is achieved between 0°C to +60°C.
