The maximum operating temperature range for the MPC860ENCVR50D4 is -40°C to 85°C (industrial temperature range). However, it's recommended to check the specific temperature range for your application and ensure that the device is operated within the recommended temperature range to ensure reliability and performance.
The clock settings for the MPC860ENCVR50D4 can be configured using the Clock Generation Module (CGM) and the Power Management Module (PMM). The CGM generates the clock signals for the processor, while the PMM controls the power modes and clock frequencies. Refer to the device's reference manual and the clocking chapter in the datasheet for more information on configuring the clock settings.
The maximum frequency for the external clock input on the MPC860ENCVR50D4 is 33.33 MHz. However, it's recommended to check the specific clock frequency requirements for your application and ensure that the external clock source is within the recommended frequency range to ensure reliable operation.
The MPC860ENCVR50D4 has a built-in Power Management Module (PMM) that allows for dynamic voltage and frequency scaling, as well as power gating. The PMM can be configured to reduce power consumption during idle periods or when the device is in a low-power state. Refer to the device's reference manual and the power management chapter in the datasheet for more information on implementing power management on the MPC860ENCVR50D4.
The MPC860ENCVR50D4 has a 32-bit address bus and can support up to 4 GB of external memory. However, the actual amount of memory that can be supported depends on the specific memory configuration and the application requirements. It's recommended to check the memory requirements for your application and ensure that the memory configuration is compatible with the device.
MPC860ENCVR50D4 datasheet
by Freescale Semiconductor
Findchips
Findchips