The maximum operating temperature range for the MPC8377ECVRANGA is -40°C to 105°C (industrial temperature range). However, it's recommended to check the specific temperature range for your application and ensure that the device is operated within the recommended temperature range to ensure reliability and performance.
The DDR2 memory interface on the MPC8377ECVRANGA can be configured using the DDR2 controller registers. You need to set the memory timing parameters, such as clock frequency, CAS latency, and burst length, according to the DDR2 memory module specifications. You can refer to the MPC8377ECVRANGA reference manual and the DDR2 memory module datasheet for more information.
The MPC8377ECVRANGA is designed to operate with a 1.0V to 1.2V core voltage and 2.5V to 3.3V I/O voltage. While it's possible to use the device with a different voltage supply, it's not recommended as it may affect the device's performance, power consumption, and reliability. You should ensure that the voltage supply meets the recommended operating conditions specified in the datasheet.
The MPC8377ECVRANGA has a built-in power management unit (PMU) that allows you to implement power management features such as dynamic voltage and frequency scaling, power gating, and low-power modes. You can use the PMU registers to configure the power management settings and optimize power consumption for your application.
The MPC8377ECVRANGA has a PCIe interface that supports up to 4 lanes, with a maximum bandwidth of 1 GB/s per lane. This means that the maximum bandwidth of the PCIe interface is 4 GB/s.
MPC8377ECVRANGA datasheet
by Freescale Semiconductor
Findchips
