The maximum operating temperature range for the MPC8313ECZQAFFC is -40°C to 105°C (industrial temperature range). However, it's recommended to operate within -20°C to 85°C for optimal performance and reliability.
The DDR2 memory interface on the MPC8313ECZQAFFC can be configured using the DDR2 controller registers. You need to set the memory timing parameters, such as clock frequency, CAS latency, and burst length, according to the DDR2 memory module specifications. Refer to the Freescale Semiconductor application note AN3944 for detailed configuration guidelines.
While the MPC8313ECZQAFFC is designed to operate at a core voltage of 1.0V, it's possible to operate it at a slightly different voltage (e.g., 0.9V to 1.1V) with some performance and power consumption trade-offs. However, it's essential to consult with Freescale Semiconductor or a qualified engineer to ensure the device operates within its specifications and doesn't compromise reliability.
The MPC8313ECZQAFFC has a built-in secure boot mechanism that uses a boot ROM and a secure boot key. To implement secure boot, you need to generate a secure boot key, store it in the device's One-Time Programmable (OTP) memory, and configure the boot ROM to use the secure boot key. Refer to the Freescale Semiconductor application note AN3945 for detailed implementation guidelines.
The maximum throughput of the Gigabit Ethernet interface on the MPC8313ECZQAFFC is approximately 940 Mbps, considering the overhead of Ethernet frames and the device's processing capabilities. However, the actual throughput may vary depending on the system design, network conditions, and application requirements.
MPC8313ECZQAFFC datasheet
by Freescale Semiconductor
Findchips
