The maximum input voltage that can be applied to the MP6922AGN is 28V, although the recommended maximum input voltage is 24V for optimal performance and reliability.
To ensure stability, it is recommended to use a minimum output capacitance of 10uF, and to place the output capacitor close to the output pin of the IC. Additionally, the input capacitor should be placed close to the input pin and have a value of at least 1uF.
The maximum output current that the MP6922AGN can deliver is 2A, although the recommended maximum output current is 1.5A for optimal performance and reliability.
The output voltage of the MP6922AGN can be adjusted by using a resistive divider network between the output pin and the ground pin, and connecting the feedback pin to the center tap of the divider network.
The EN (enable) pin is used to turn the regulator on or off. When the EN pin is pulled high, the regulator is enabled, and when it is pulled low, the regulator is disabled.
