The recommended PCB layout for the MP6901DS-LF-Z involves placing the input and output capacitors close to the IC, using wide traces for the power lines, and separating the analog and digital grounds. A 4-layer PCB with a solid ground plane is also recommended.
To ensure stability and prevent oscillations, it's essential to follow the recommended component values and PCB layout guidelines. Additionally, the output capacitor should have a low ESR, and the input capacitor should be placed close to the IC. A minimum output capacitance of 10uF is recommended.
The MP6901DS-LF-Z is rated for operation up to 85°C ambient temperature. However, the junction temperature should not exceed 125°C. It's essential to ensure proper thermal design and heat dissipation to prevent overheating.
While it's possible to use a different inductor value or type, it's not recommended. The recommended inductor value and type are optimized for the MP6901DS-LF-Z's internal compensation and switching frequency. Using a different inductor may affect the converter's stability and performance.
To troubleshoot issues with the output voltage or current, start by checking the input voltage, output voltage, and output current using an oscilloscope or multimeter. Verify that the component values and PCB layout meet the recommended specifications. Check for signs of overheating, and ensure that the input and output capacitors are properly connected.
MP6901DS-LF-Z datasheet
by Monolithic Power Systems
