Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    MP2918GF datasheet by Monolithic Power Systems

    • Integrated Circuits (ICs) - PMIC - Voltage Regulators - DC DC Switching Controllers - 4V-40V INPUT, CURRENT MODE SYNCH
    • Original
    • Yes
    • Unknown
    • Active
    • EAR99
    • 8542.39.00.01
    • 8542.39.00.00
    • Find it at Findchips.com

    MP2918GF datasheet preview

    MP2918GF Frequently Asked Questions (FAQs)

    • The MP2918GF can handle a maximum input voltage of 24V, but it's recommended to keep it below 18V for optimal performance and reliability.
    • To ensure stability, make sure to use a minimum output capacitance of 10uF, and a maximum ESR of 1 ohm. Also, keep the output capacitor close to the IC to minimize parasitic inductance.
    • The MP2918GF can provide a maximum output current of 1.5A, but it's recommended to keep it below 1.2A for optimal performance and reliability.
    • The output voltage can be adjusted by using a resistive divider network between the output and the FB pin. The ratio of the resistors determines the output voltage, which can be calculated using the formula: Vout = 0.8V x (R1 + R2) / R2.
    • The EN (enable) pin is used to turn the regulator on or off. When the EN pin is high, the regulator is enabled, and when it's low, the regulator is disabled.
    Price & Stock Powered by Findchips Logo
    Supplyframe Tracking Pixel