MP2498DV-LF-Z datasheet by Monolithic Power Systems

MP2498DV-LF-Z Frequently Asked Questions (FAQs)

• What is the maximum input voltage that the MP2498DV-LF-Z can handle?
  The maximum input voltage is 24V, but it's recommended to keep it below 20V for optimal performance and reliability.
• How do I ensure the stability of the output voltage?
  To ensure stability, make sure to use a minimum output capacitance of 10uF, and a maximum ESR of 1 ohm. Also, keep the output voltage within the recommended range of 0.8V to 15V.
• What is the maximum output current that the MP2498DV-LF-Z can provide?
  The maximum output current is 2A, but it's recommended to keep it below 1.5A for optimal performance and reliability.
• How do I adjust the output voltage?
  The output voltage can be adjusted by using a resistive divider network between the VOUT pin and the GND pin. The ratio of the resistors determines the output voltage.
• What is the purpose of the EN pin?
  The EN (Enable) pin is used to turn the device on or off. When the EN pin is high, the device is enabled, and when it's low, the device is disabled.