MOP-AL202C-BYFY-25E-3IN datasheet by Matrix Orbital

MOP-AL202C-BYFY-25E-3IN Frequently Asked Questions (FAQs)

• What is the recommended power-up sequence for the display module?
  The recommended power-up sequence is to apply power to the VCC pin first, followed by the VLOGIC pin, and then the backlight voltage (if applicable). This ensures proper initialization of the display module.
• How do I configure the display module for 8-bit or 16-bit data bus mode?
  The display module can be configured for 8-bit or 16-bit data bus mode by setting the DB0-DB15 pins accordingly. For 8-bit mode, tie DB8-DB15 to VCC or GND, and for 16-bit mode, use all 16 data bus pins.
• What is the maximum operating temperature range for the display module?
  The maximum operating temperature range for the MOP-AL202C-BYFY-25E-3IN display module is -20°C to 70°C. Operating the module outside this range may affect its performance and reliability.
• How do I adjust the backlight brightness?
  The backlight brightness can be adjusted by varying the voltage applied to the backlight pins (BLK+ and BLK-). The recommended backlight voltage range is 3.0V to 5.5V.
• What is the typical response time for the display module?
  The typical response time for the MOP-AL202C-BYFY-25E-3IN display module is around 10ms to 20ms. This is the time it takes for the display to update after receiving new data.