MKL14Z32VFM4 datasheet by Freescale Semiconductor

MKL14Z32VFM4 Frequently Asked Questions (FAQs)

• What is the maximum clock frequency that can be used with the internal oscillator?
  The maximum clock frequency that can be used with the internal oscillator is 48 MHz, but it's recommended to use a crystal oscillator for frequencies above 24 MHz for better accuracy and stability.
• How do I configure the pin muxing for peripherals?
  The pin muxing for peripherals can be configured using the SIM_SCGC5 and SIM_SCGC6 registers, which control the clock gating for each peripheral. The PORTx_PCRn registers are used to configure the pin muxing for each individual pin.
• What is the minimum voltage required for the device to operate?
  The minimum voltage required for the device to operate is 1.71V, but it's recommended to use a voltage regulator to ensure a stable 1.8V supply for optimal performance and reliability.
• How do I use the low-power modes to reduce power consumption?
  The device has several low-power modes, including Stop, VLPR, and VLPW. These modes can be entered using the SMC_PMCTRL register, and the power consumption can be further reduced by disabling peripherals and using the VLLS (Very Low Leakage Stop) mode.
• What is the maximum amount of current that can be sourced or sunk by a GPIO pin?
  The maximum amount of current that can be sourced or sunk by a GPIO pin is 4mA, but it's recommended to limit the current to 2mA or less to ensure reliable operation and prevent damage to the device.