MC74HC1G32DBVT1G datasheet by onsemi

MC74HC1G32DBVT1G Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the MC74HC1G32DBVT1G?
  The recommended operating voltage range for the MC74HC1G32DBVT1G is 2.0V to 6.0V, with a typical voltage of 5.0V.
• How do I handle the input pins when they are not in use?
  When the input pins are not in use, they should be tied to a valid logic level (either VCC or GND) to prevent unwanted switching and reduce power consumption.
• What is the maximum frequency of operation for the MC74HC1G32DBVT1G?
  The maximum frequency of operation for the MC74HC1G32DBVT1G is typically 100 MHz, but this can vary depending on the specific application and operating conditions.
• How do I ensure that the output signals are not distorted or attenuated?
  To ensure that the output signals are not distorted or attenuated, it is recommended to use a suitable output load, such as a 1kΩ to 10kΩ resistor, and to keep the output signal paths as short as possible.
• What is the power consumption of the MC74HC1G32DBVT1G?
  The power consumption of the MC74HC1G32DBVT1G is typically around 1.65 μA per gate at 5.0V and 25°C, but this can vary depending on the specific application and operating conditions.