The MC68EN360EM25L can operate in a temperature range of -40°C to 125°C, but it's recommended to operate within -20°C to 85°C for optimal performance.
The MC68EN360EM25L has an internal clock source, but you can also use an external clock source. You need to configure the clock source through the Clock Generator Module (CGM) registers. Refer to the datasheet for specific register settings.
The maximum current consumption of the MC68EN360EM25L depends on the operating frequency and voltage. At 25 MHz and 3.3V, the maximum current consumption is around 35 mA. However, this value can vary depending on the specific application and usage.
The MC68EN360EM25L has a built-in watchdog timer (WDT) that can be enabled and configured through the WDT control register. You need to set the WDT period and enable the WDT interrupt to implement a watchdog timer in your application.
Yes, the MC68EN360EM25L has several low-power modes, including Stop, Wait, and Doze modes, which can reduce power consumption. You can also use the Power Management Module (PMM) to control the power consumption of the microcontroller.
MC68EN360EM25L datasheet
by Freescale Semiconductor
