The recommended operating temperature range for the MC13892CJVLR2 is -40°C to 105°C, as specified in the datasheet. However, it's essential to note that the device can operate at a wider temperature range, but with reduced performance and reliability.
To configure the MC13892CJVLR2 for low-power mode, you need to set the Power Mode Control (PMC) register to the desired low-power state. This can be done by writing to the PMC register through the I2C interface. Refer to the datasheet for the specific register settings and power consumption values.
The maximum current consumption of the MC13892CJVLR2 depends on the operating mode and frequency. According to the datasheet, the maximum current consumption is around 120 mA at 2.7 V and 26 MHz. However, this value can vary depending on the specific application and usage.
The MC13892CJVLR2 has a built-in watchdog timer that can be enabled and configured through the Watchdog Timer Control (WTC) register. You need to set the WTC register to the desired timeout period and enable the watchdog timer. The watchdog timer will reset the device if it doesn't receive a reset signal within the specified timeout period.
Yes, the MC13892CJVLR2 can operate with a 3.3 V power supply. However, you need to ensure that the input voltage is within the recommended operating range of 2.7 V to 3.6 V. Additionally, you may need to adjust the voltage regulator settings and power consumption calculations accordingly.
MC13892CJVLR2 datasheet
by Freescale Semiconductor
