The recommended PCB footprint for the MBR20H100CTF-G1 is a standard SOT-23 package with a minimum pad size of 0.8mm x 0.8mm and a maximum pad size of 1.2mm x 1.2mm, with a 0.5mm spacing between pads.
To ensure reliable operation of the MBR20H100CTF-G1 in high-temperature environments, it is recommended to follow proper thermal management practices, such as providing adequate heat sinking, using a thermally conductive PCB material, and ensuring good airflow around the device.
The maximum allowable voltage stress on the MBR20H100CTF-G1 is 20V, as specified in the datasheet. Exceeding this voltage may result in device damage or failure.
Yes, the MBR20H100CTF-G1 can be used in a switching regulator application, but it is essential to ensure that the device is properly biased and that the switching frequency is within the recommended range to avoid overheating and ensure reliable operation.
To handle ESD protection when working with the MBR20H100CTF-G1, it is recommended to follow proper ESD handling procedures, such as using an ESD wrist strap, ESD mat, and ESD-safe tools, and to ensure that the device is properly grounded during handling and assembly.
MBR20H100CTF-G1 datasheet
by Diodes Incorporated
