The recommended operating temperature range for the MB95F396KPMC-G-SNE2 is -40°C to +85°C, as specified in the datasheet. However, it's essential to note that the device can tolerate a wider temperature range during storage, which is -55°C to +125°C.
The clock settings for the MB95F396KPMC-G-SNE2 can be configured using the Clock Control Register (CCR). The CCR allows you to select the clock source, divide the clock frequency, and enable or disable the clock. Refer to the datasheet for the specific register addresses and bit settings.
The maximum frequency for the SPI interface on the MB95F396KPMC-G-SNE2 is 40 MHz. However, it's recommended to operate the SPI interface at a frequency of 20 MHz or lower to ensure reliable data transfer.
The MB95F396KPMC-G-SNE2 has a built-in watchdog timer that can be enabled and configured using the Watchdog Timer Control Register (WTCSR). The watchdog timer can be set to timeout after a specific period, and it can be reset using the WDT reset signal. Refer to the datasheet for the specific register addresses and bit settings.
The power consumption of the MB95F396KPMC-G-SNE2 in sleep mode is typically around 10 μA. However, this value can vary depending on the specific sleep mode and the configuration of the device. Refer to the datasheet for the specific power consumption values in different sleep modes.
