The recommended PCB layout for the MAX97220AETE+ involves placing the device near the audio input connector, using a ground plane to reduce noise, and keeping the analog and digital traces separate. A 4-layer PCB with a dedicated ground plane is recommended.
To optimize the performance of the MAX97220AETE+ in a noisy environment, use a low-pass filter at the input, add a ferrite bead or a common-mode choke to the power supply lines, and use a shielded cable for the audio input. Additionally, consider using a noise-reducing capacitor between the VCC and GND pins.
The maximum input voltage that the MAX97220AETE+ can handle is 3.6V. Exceeding this voltage may damage the device. It's recommended to use a voltage limiter or a clamp circuit to prevent overvoltage conditions.
The MAX97220AETE+ can be configured for a specific audio application by adjusting the gain settings, filter cutoff frequencies, and output impedance. Refer to the datasheet and application notes for specific configuration guidelines for your application.
The power consumption of the MAX97220AETE+ depends on the operating mode and the supply voltage. In typical operating conditions, the device consumes around 12mA of current from a 3.3V supply voltage. Refer to the datasheet for more information on power consumption.
MAX97220AETE+ datasheet
by Maxim Integrated Products
Findchips
