The recommended PCB layout for the MAX9708ETN+TD involves keeping the input and output traces as short as possible, using a solid ground plane, and placing the device close to the audio input and output connectors. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane to minimize noise and EMI.
The MAX9708ETN+TD can be configured for specific audio applications by adjusting the gain setting resistors (R1 and R2) and the output filter components (C1 and R3). For example, for a headphone amplifier, a gain of 6dB to 12dB is typical, while for a line driver, a gain of 0dB to 6dB is typical. The output filter components can be adjusted to optimize the frequency response and noise performance for the specific application.
The maximum power supply voltage for the MAX9708ETN+TD is 5.5V. Exceeding this voltage can cause damage to the device. It's recommended to use a voltage regulator or a voltage limiter to ensure that the power supply voltage remains within the recommended range.
The MAX9708ETN+TD operates within a recommended temperature range of -40°C to +85°C. To ensure that the device operates within this range, it's recommended to provide adequate heat sinking, such as a thermal pad or a heat sink, and to avoid exposing the device to extreme temperatures during storage or operation.
The typical quiescent current consumption of the MAX9708ETN+TD is around 2.5mA. However, this can vary depending on the specific application and the power supply voltage. It's recommended to consult the datasheet and to perform measurements in the specific application to determine the actual quiescent current consumption.
MAX9708ETN+TD datasheet
by Maxim Integrated Products
Findchips
