The recommended PCB layout for the MAX9224ETI+ involves keeping the input and output traces as short as possible, using a solid ground plane, and placing the device close to the signal source. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane to minimize noise and EMI.
To ensure the MAX9224ETI+ is properly powered, it's recommended to use a high-quality, low-noise power supply with a voltage range of 2.7V to 5.5V. Additionally, it's recommended to use a 0.1uF bypass capacitor between the VCC pin and the GND pin to filter out noise and ensure stable operation.
The MAX9224ETI+ can support data rates up to 100Mbps, making it suitable for high-speed applications such as HDMI, DisplayPort, and USB 3.0.
The MAX9224ETI+ can be configured for differential or single-ended operation by connecting the appropriate pins. For differential operation, connect the IN+ and IN- pins to the differential signal source, and for single-ended operation, connect the IN+ pin to the signal source and the IN- pin to GND.
The typical power consumption of the MAX9224ETI+ is around 10mA, making it suitable for low-power applications. However, the actual power consumption may vary depending on the operating frequency, input signal amplitude, and output load.
MAX9224ETI+ datasheet
by Maxim Integrated Products
