The recommended layout and placement for the MAX8880EUT-T can be found in the Maxim Integrated Products' application note AN5141, which provides guidelines for PCB layout, component placement, and thermal management to ensure optimal performance and reliability.
The selection of the output capacitor for the MAX8880EUT-T depends on the specific application requirements, such as output voltage, output current, and ripple voltage. A general guideline is to choose a capacitor with a capacitance value between 10uF to 22uF, and a voltage rating of at least 2x the output voltage. Additionally, the capacitor's ESR (Equivalent Series Resistance) should be less than 100mΩ.
The MAX8880EUT-T can handle input voltages up to 28V, but it is recommended to operate within the specified input voltage range of 4.5V to 24V for optimal performance and reliability.
The MAX8880EUT-T has a built-in overvoltage protection (OVP) feature that can be enabled by connecting the OVP pin to a voltage divider network. The OVP threshold can be set by selecting the appropriate resistor values in the voltage divider network. Refer to the datasheet for more details on implementing OVP with the MAX8880EUT-T.
The thermal shutdown temperature of the MAX8880EUT-T is typically around 150°C, but it can vary depending on the specific device and operating conditions. It is recommended to consult the datasheet and application notes for more information on thermal management and shutdown.
MAX8880EUT-T datasheet
by Maxim Integrated Products
