The MAX811TEUS+ is a sensitive device and requires careful layout and placement to ensure proper operation. It is recommended to follow the layout guidelines provided in the datasheet, including keeping the input and output traces short and away from noise sources, and using a solid ground plane to reduce noise and EMI.
The MAX811TEUS+ has a specific startup sequence that must be followed to ensure proper operation. The recommended startup sequence is to apply power to the VCC pin, followed by the EN pin, and then the input voltage. The device will then enter a soft-start mode and gradually ramp up to the regulated output voltage.
The MAX811TEUS+ can handle input voltages up to 28V, but it is recommended to operate within the specified input voltage range of 4.5V to 24V for optimal performance and reliability.
The output voltage of the MAX811TEUS+ can be adjusted by connecting a resistive divider network between the output pin and the ADJ pin. The output voltage can be calculated using the formula provided in the datasheet, and the resistors should be chosen to ensure a stable output voltage.
The EN pin is an active-high enable input that allows the device to be turned on and off. When the EN pin is high, the device is enabled and the output voltage is regulated. When the EN pin is low, the device is disabled and the output voltage is turned off.
