MAX810LEUR+T datasheet by Maxim Integrated Products

MAX810LEUR+T Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the MAX810LEUR+T?
  The recommended operating voltage range for the MAX810LEUR+T is 2.7V to 5.5V.
• How do I ensure the MAX810LEUR+T is in a stable state during power-up?
  To ensure the MAX810LEUR+T is in a stable state during power-up, it is recommended to add a 0.1uF capacitor between the VCC and GND pins, and a 10kΩ pull-up resistor on the RST pin.
• What is the purpose of the RST pin on the MAX810LEUR+T?
  The RST pin on the MAX810LEUR+T is an active-low reset input that can be used to reset the device to its default state. It can be tied to VCC through a pull-up resistor or driven by an external reset signal.
• How do I interface the MAX810LEUR+T with a microcontroller?
  The MAX810LEUR+T can be interfaced with a microcontroller through its open-drain output, which can be connected to a digital input on the microcontroller. The microcontroller can then read the output of the MAX810LEUR+T to determine the voltage level.
• What is the response time of the MAX810LEUR+T?
  The response time of the MAX810LEUR+T is typically 10μs, which is the time it takes for the device to respond to a change in the input voltage.