MAX706RESA+T datasheet by Maxim Integrated Products

MAX706RESA+T Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the MAX706RESA+T?
  The recommended operating voltage range for the MAX706RESA+T is 2.7V to 5.5V.
• How do I ensure the MAX706RESA+T is properly reset during power-up?
  To ensure proper reset during power-up, connect a 0.1uF capacitor between the RESET pin and GND, and a 1kΩ resistor between the RESET pin and VCC.
• What is the purpose of the NOE (No-Connect) pin on the MAX706RESA+T?
  The NOE pin is not connected internally and should be left unconnected or tied to GND to prevent any unwanted behavior.
• How do I handle the watchdog timer (WDT) on the MAX706RESA+T?
  The WDT is enabled by default. To disable it, write 0x01 to the WDT control register. To clear the WDT, write 0x00 to the WDT control register.
• What is the maximum clock frequency supported by the MAX706RESA+T?
  The MAX706RESA+T supports clock frequencies up to 16MHz.