The recommended layout and placement for the MAX705CSA+ involves placing the device close to the power source, using a solid ground plane, and keeping the input and output traces short and wide to minimize inductance and resistance.
To ensure proper decoupling, place a 0.1uF ceramic capacitor between the VCC pin and GND, and a 10uF electrolytic capacitor between the VIN pin and GND, as close to the device as possible.
The MAX705CSA+ can handle input voltages up to 12V, but it's recommended to operate within the specified input voltage range of 4.5V to 10.5V for optimal performance and reliability.
The output voltage of the MAX705CSA+ can be adjusted by connecting a resistor divider network between the VOUT pin and GND, and adjusting the resistor values to achieve the desired output voltage.
The MAX705CSA+ can provide a maximum output current of 150mA, but it's recommended to operate within the specified output current range of 10mA to 100mA for optimal performance and reliability.
MAX705CSA+ datasheet
by Maxim Integrated Products
