The recommended layout and placement for the MAX6864UK16D3S+ can be found in the Maxim Integrated Products' application note AN5141, which provides guidelines for PCB layout, component placement, and thermal management to ensure optimal performance and reliability.
The selection of the output capacitor for the MAX6864UK16D3S+ depends on the specific application requirements, such as output voltage, current, and ripple. A general guideline is to choose a capacitor with a minimum capacitance of 10uF and a maximum ESR of 1ohm. Additionally, the capacitor should be rated for the maximum output voltage and operating temperature range.
The MAX6864UK16D3S+ has an absolute maximum input voltage rating of 6.5V. However, the recommended operating input voltage range is 2.7V to 5.5V. Exceeding the absolute maximum input voltage can cause permanent damage to the device.
The MAX6864UK16D3S+ has a built-in overvoltage protection (OVP) feature that can be enabled by connecting the OVP pin to a voltage divider network. The OVP threshold can be set by selecting the appropriate resistor values in the voltage divider network. Refer to the datasheet for more information on implementing OVP with the MAX6864UK16D3S+.
The thermal shutdown temperature for the MAX6864UK16D3S+ is typically around 150°C. When the device temperature exceeds this threshold, it will shut down to prevent damage. The device will automatically restart when the temperature drops below 130°C.
MAX6864UK16D3S+ datasheet
by Maxim Integrated Products
Findchips
