The recommended layout and placement for the MAX6765TTLD2/V+T can be found in the Maxim Integrated Products' application note AN5141, which provides guidelines for PCB layout, component placement, and thermal management to ensure optimal performance and reliability.
The output voltage of the MAX6765TTLD2/V+T can be adjusted by connecting a resistive divider network between the VOUT pin and the GND pin, and then connecting the center tap of the divider to the FB pin. The ratio of the resistors determines the output voltage, which can be calculated using the formula provided in the datasheet.
The maximum input voltage that the MAX6765TTLD2/V+T can handle is 5.5V, as specified in the datasheet. Exceeding this voltage may damage the device or affect its performance.
To ensure the stability of the MAX6765TTLD2/V+T output voltage, it is recommended to use a minimum output capacitance of 10uF, and to place the capacitor close to the VOUT pin. Additionally, the input voltage should be well-regulated and free of noise to prevent oscillations.
The MAX6765TTLD2/V+T is rated for operation up to 125°C, but its performance and reliability may be affected at high temperatures. It is recommended to derate the device's performance and consider using thermal management techniques, such as heat sinking or airflow, to keep the device temperature within a safe operating range.
MAX6765TTLD2/V+T datasheet
by Maxim Integrated Products
