The recommended PCB layout for the MAX6061BEUR-T involves keeping the input and output traces as short as possible, using a solid ground plane, and placing a 10uF capacitor between the VIN and GND pins to filter out noise. Additionally, it's recommended to place a 1uF capacitor between the VOUT and GND pins to reduce output noise.
To ensure stability, make sure to follow the recommended PCB layout, use a sufficient output capacitor (at least 1uF), and keep the input voltage within the recommended range (2.7V to 5.5V). Additionally, avoid using long input traces and keep the input capacitor (if used) close to the VIN pin.
The absolute maximum input voltage rating for the MAX6061BEUR-T is 6V. Applying a voltage higher than this can damage the device. However, the recommended operating input voltage range is 2.7V to 5.5V.
The MAX6061BEUR-T is rated for operation up to 125°C. However, the device's performance and reliability may degrade at high temperatures. It's recommended to follow the thermal design guidelines and ensure proper heat dissipation to maintain optimal performance.
The output voltage of the MAX6061BEUR-T is adjustable using an external resistor divider network. The output voltage can be calculated using the formula: VOUT = 1.25V x (1 + R1/R2), where R1 and R2 are the resistors in the divider network.
MAX6061BEUR-T datasheet
by Maxim Integrated Products
