MAX5035BUSA+ datasheet by Maxim Integrated Products

MAX5035BUSA+ Frequently Asked Questions (FAQs)

• What is the maximum input voltage that the MAX5035BUSA+ can handle?
  The MAX5035BUSA+ can handle input voltages up to 40V, but it's recommended to operate within the specified input voltage range of 4.5V to 36V for optimal performance.
• How do I ensure the stability of the output voltage?
  To ensure the stability of the output voltage, it's essential to use a suitable output capacitor with a minimum capacitance of 10uF and an ESR of 1Ω or less. Additionally, the output capacitor should be placed as close to the output pin as possible.
• What is the purpose of the EN pin, and how do I use it?
  The EN (enable) pin is used to turn the regulator on or off. To enable the regulator, connect the EN pin to a logic high (VIN or higher). To disable the regulator, connect the EN pin to a logic low (GND).
• How do I calculate the output voltage of the MAX5035BUSA+?
  The output voltage of the MAX5035BUSA+ can be calculated using the following formula: VOUT = (R1 / R2) × 1.25V, where R1 and R2 are the resistors connected to the FB (feedback) pin.
• What is the maximum output current that the MAX5035BUSA+ can provide?
  The MAX5035BUSA+ can provide a maximum output current of 3A, but it's recommended to operate within the specified output current range of 1mA to 2A for optimal performance.