Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img MAX4162ESA+ datasheet by Maxim Integrated Products

    • Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps, Integrated Circuits (ICs), IC OPAMP GP 200KHZ RRO 8SOIC
    • Original
    • Yes
    • Yes
    • Transferred
    • EAR99
    • 8542.33.00.01
    • Find it at Findchips.com

    MAX4162ESA+ datasheet preview

    MAX4162ESA+ Frequently Asked Questions (FAQs)

    • A good PCB layout for the MAX4162ESA+ involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the power supply. Additionally, it's recommended to use a 4-layer PCB with a dedicated analog layer to minimize noise and crosstalk.
    • To ensure proper biasing, connect the VCC pin to a stable 5V power supply, and the GND pin to a solid ground plane. Also, make sure to decouple the power supply with a 10uF capacitor and a 100nF capacitor in parallel to filter out noise.
    • The MAX4162ESA+ can handle input voltages up to 6V without damage. However, it's recommended to keep the input voltage within the specified range of 0V to 5.5V to ensure optimal performance and prevent damage.
    • To troubleshoot issues with the MAX4162ESA+, first check the power supply voltage and ensure it's within the specified range. Then, verify that the input voltage is within the specified range and that the device is properly biased. If the issue persists, check for any signs of overheating or physical damage to the device.
    • The MAX4162ESA+ is rated for operation up to 125°C. However, it's recommended to derate the device's performance at high temperatures to ensure reliability and prevent damage. Consult the datasheet for specific derating guidelines.
    Price & Stock Powered by Findchips Logo
    Supplyframe Tracking Pixel