The recommended PCB layout for the MAX3349EAEBE+ involves keeping the input and output traces as short as possible, using a solid ground plane, and placing the device close to the signal source. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane to minimize noise and EMI.
To ensure the MAX3349EAEBE+ is properly powered, make sure to provide a clean and stable power supply voltage within the recommended range of 2.7V to 5.5V. Also, ensure that the power supply decoupling capacitors are placed close to the device and have a low ESL (Equivalent Series Inductance) to minimize power supply noise.
The MAX3349EAEBE+ can support data rates up to 100Mbps, making it suitable for high-speed applications such as USB, SATA, and PCIe.
The MAX3349EAEBE+ has an adjustable output voltage level that can be set using external resistors. The output voltage level can be calculated using the formula: VOUT = (R1/R2) * (VCC - VREF), where R1 and R2 are the external resistors, VCC is the power supply voltage, and VREF is the internal reference voltage.
The typical power consumption of the MAX3349EAEBE+ is around 10mA to 20mA, depending on the output voltage and load current. However, the actual power consumption may vary depending on the specific application and operating conditions.
MAX3349EAEBE+ datasheet
by Maxim Integrated Products
Findchips
