The recommended PCB layout for the MAX3344EEUE+ is to keep the input and output traces as short as possible, and to use a solid ground plane to reduce noise and EMI. Additionally, it's recommended to place a 0.1uF bypass capacitor between the VCC pin and GND pin, and to use a 1kΩ to 10kΩ resistor in series with the input signal to prevent overvoltage.
To ensure the MAX3344EEUE+ is properly powered, make sure to connect the VCC pin to a clean, regulated power supply between 2.7V and 5.5V, and the GND pin to a solid ground plane. Also, ensure that the power supply can provide enough current to support the device's operating current, which is typically around 1mA.
The MAX3344EEUE+ can support data rates up to 100Mbps, making it suitable for high-speed applications such as USB, Ethernet, and video interfaces.
The MAX3344EEUE+ can be configured for different logic levels by connecting the VREF pin to a voltage reference source. For example, to configure the device for 3.3V logic levels, connect VREF to a 3.3V voltage reference source. The device can also be configured for 5V logic levels by connecting VREF to a 5V voltage reference source.
The typical propagation delay of the MAX3344EEUE+ is around 10ns to 20ns, depending on the input signal frequency and the output load capacitance.
MAX3344EEUE+ datasheet
by Maxim Integrated Products
Findchips
