A good PCB layout for the MAX3313EUB+ involves keeping the input and output traces short and away from each other, using a solid ground plane, and placing the device close to the signal source. Additionally, using a shielded enclosure and minimizing the number of vias can help reduce EMI.
To ensure proper power and decoupling, connect the VCC pin to a clean, low-noise power supply, and decouple the VCC pin with a 0.1uF ceramic capacitor to GND. Additionally, use a 10uF capacitor in parallel with the 0.1uF capacitor to further reduce noise.
The MAX3313EUB+ can support data rates up to 100Mbps, making it suitable for high-speed applications such as USB, Ethernet, and video interfaces.
The MAX3313EUB+ can be configured for differential or single-ended operation by connecting the appropriate pins. For differential operation, connect the OUT+ and OUT- pins to the differential signal lines. For single-ended operation, connect the OUT+ pin to the signal line and the OUT- pin to GND.
The typical power consumption of the MAX3313EUB+ is around 10mA, making it suitable for low-power applications. However, the actual power consumption may vary depending on the operating frequency, input signal amplitude, and output load.
MAX3313EUB+ datasheet
by Maxim Integrated Products
